Improper nailing blamed for recurring roof leaks in New Hampshire home
Paramount Roofing says a Belmont, New Hampshire roof kept leaking and shedding shingles because the shingles were nailed into decking instead of structural framing. The company replaced the system with a standing seam metal roof after finding the fastening error during removal of the old shingles.
Why it matters: - Homeowners with repeated roof leaks may be dealing with a hidden fastening problem, not just bad shingles. - Improper nailing can cause the same failure to return after multiple repairs. - The Belmont case shows why repeated patch jobs can miss the real source of roof damage.
What happened: - Paramount Roofing responded to a Belmont, New Hampshire home with an active leak and shingles sliding out of place. - The homeowner had already paid for multiple repairs from other contractors. - After removing the old shingles, the crew found the shingles had been nailed into tongue-and-groove plywood decking instead of proper structural framing. - The nails were only biting about a quarter of an inch of material.
The details: - That shallow hold was not enough to keep the shingles secured. - The weak fastening explained why the sliding kept coming back. - Paramount Roofing installed a new layer of plywood over the existing insulation to create a properly fastened base. - The company then installed a standing seam metal roof using metal clips. - That system does not rely on face nailing through the panels. - Brandon Sullivan, owner of Paramount Roofing, said recurring problems usually mean the real cause was never fixed. - Sullivan said the mistake happens more often than people realize. - Paramount Roofing serves Belmont, Tilton, Franklin, Gilford and Boscawen, plus the wider Lakes Region and central New Hampshire. - The company offers roof replacement, roof repair, standing seam metal roofing and asphalt shingle systems.
Between the lines: - The case points to a broader quality-control issue in roofing work, where fastening methods can determine whether repairs last. - A leak that returns in the same area may be a sign the roof deck or installation method needs inspection before more money goes into patching.
What's next: - Paramount Roofing is urging homeowners with repeated shingle problems, sliding or leaks in the same area to inspect the deck and fastening method before approving another repair. - The company continues serving homeowners across New Hampshire from its Hooksett base. - More information is available through the company's social channels: Instagram, Facebook and YouTube.
The bottom line: - When roof leaks keep returning, the fix may require rebuilding the base — not another patch.
Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.
Sign up for:
New Hampshire Week
The daily local news briefing you can trust. Every day. Subscribe now.
Check Your Email!
We sent a one-time activation link to: .
Confirm it's you by clicking the email link.
If the email is not in your inbox, check spam or try again.
Welcome back!
is already signed up. Check your inbox for updates.